The jelly-like soft toy, which can be wrinkled endlessly in your hands, thrown into the wall and entertained with it in other ways, got the funny name “lizun”. Already wanted to get such an interesting thing? It’s not necessary to go to the store. There are several interesting recipes that will tell you how to make a slime without glue at home, from improvised means.

From water and starch

This recipe does not include liquid glue or a pencil.

Ingredients:

  • starch (suitable for both potato and corn) - 130-150 g;
  • water - 70-80 ml;
  • dye of any shade - ¼ tsp.

Manufacturing steps:

  1. Pour all prepared dry starch into a suitable plastic container. It must be remembered that the size of the toy depends on this component. If desired, its amount can be increased.
  2. Add coloring matter. Initially, it may not be the shade that is planned at all. No need to worry, later (after kneading) the color will become original.
  3. Pour in water. Certainly - cold. First, about a third of the liquid is introduced, and only then the rest (after thorough mixing). It is at this stage that the process of changing the color of the paint will begin.
  4. Stir the components to the desired density.

It will be possible to have fun with the finished toy no longer than two days. Then it will become worthless. But from the simplest components it will be possible to quickly make a new one.

Toothpaste preparation method

From toothpaste, you get safe entertainment that can be used even by kids. The main thing is not to take the toy in your mouth.

Ingredients:

  • toothpaste - its volume depends on the size of the planned product;
  • any food coloring - a few drops or a pinch.

Manufacturing steps:

  1. Squeeze the prepared amount of paste into a glass container. It is convenient to use a tall glass for this. It should be noted right away that the paste should be very thick. Best gel. But her other qualities are unimportant. You can buy the cheapest that you managed to find.
  2. Add dye to the paste.
  3. Make the mass as homogeneous as possible. Even the smallest grains of dye should not remain in it.
  4. Send the mixture to a small pot and then to a water bath. This is necessary to remove excess fluid from the composition. Usually 13-15 minutes are enough.

The thick mass can be removed from the pan and molded into a ball. If the composition turned out to be dry, you just need to grease your hands with any vegetable oil and thoroughly mash it.

Shaving foam slime

The basis of the toy is the simplest and cheapest shaving product.

Ingredients:

  • shaving foam - at least 1 full glass;
  • acrylic or food color - optional;
  • thick shampoo - ½ tbsp .;
  • salt - 1 tbsp. l

Manufacturing steps:

  1. Pour the selected shampoo into a convenient mixing bowl.
  2. From above send all the shaving foam. It is important that she is magnificent and has not yet settled down.
  3. Add paint according to the instructions on the package.
  4. Add salt. The amount of each ingredient can be independently adjusted, so that in the end a mass of the desired density is obtained.
  5. Steam the mixture.
  6. Send the lizun to the fridge.

After about half an hour, you can try to use the product for its intended purpose.

From shampoo and salt

This is the simplest recipe for the product in question. But it requires a person to be careful and patient. Instead of shampoo, you can use a dishwashing detergent.

Ingredients:

  • thick opaque shampoo - 4-5 tsp;
  • salt is a pinch.

Manufacturing steps:

  1. The shampoo will need to be sent to a container convenient for mixing.
  2. Pour a pinch of salt from above. This ingredient will be literally enough on the tip of the knife.
  3. Mix all the ingredients thoroughly. It is convenient to do this with a wide wooden spoon or even with your hands.
  4. Send the mixture to the refrigerator.
  5. After approximately 17-20 minutes, the toy-slime will be ready.

It should be noted right away that shampoo slime will be very different from that made at the factory. The mass will be sticky. But it is perfect for all kinds of educational games with your fingers.

Step-by-step instruction from flour

According to this scheme, a lizun without PVA glue is elastic, well stretching. In the warm form, playing with him is a pleasure. But after cooling, the mass becomes not so soft.

Ingredients:

  • flour - a full glass;
  • water - a full glass;
  • soda - a pinch;
  • coloring matter - any.

Manufacturing steps:

  1. Pour a glass of flour into a container suitable for kneading.
  2. Pour the dry component with not very cold water.
  3. If after mixing the composition is too thick, the amount of liquid must be increased. The optimal consistency is like store sour cream.
  4. Divide the mixture into three parts. Each painted in different colors. For this, you can use a variety of coloring substances - acrylic, food. Even a composition from a felt-tip pen is suitable.
  5. Each part needs to be warmed up. This will be possible in the microwave (1 minute at medium power), in the oven (6 minutes at 170-180 degrees), in a frying pan, constantly stirring until thickened.

When the slime has cooled slightly, you can use it to play.

Plasticine toy

Even plasticine can be made the basis of the discussed unusual toys.

Ingredients:

  • edible gelatin - 15 g;
  • water - a full glass;
  • plasticine from any manufacturer and any color - 90-100 g.

Manufacturing steps:

  1. Pour dry ingredients with cool water (leave approximately 50-70 ml). No need to mix. The mixture is enough just to leave for about an hour.It is best to immediately mix everything in a metal container, then to send it to the fire.
  2. When the gelatin is sufficiently swollen, you need to put the bowl / pan on a small fire and wait for it to boil. Then - immediately remove from the burner.
  3. Plasticine knead. Need warm hands to make it soft.
  4. Mix the mass with the remaining water. It is convenient to do this with a wide spatula.
  5. Combine the mixtures from the second and fourth steps.

Send the resulting mass to cool for forty minutes.

From glue stick

Any glue stick for creating a slime will do.

Ingredients:

  • glue stick - 1 pc.;
  • dye - optional;
  • borax - half a teaspoon;
  • water - 1/3 tbsp.

Manufacturing steps:

  1. Remove adhesive base from pencil. Microwave to soften.
  2. Add dye.
  3. Mix liquid with borax separately.
  4. Connect all components.

If the slime is liquid, you can increase the amount of borax.

How to Make Edible Slime from Nutella

Slimes without glue and sodium tetraborate can be edible.

Ingredients:

  • soft chewing marshmallows - 90-100 g;
  • Nutella is a small can.

Manufacturing steps:

  1. You need to start cooking with a sweet base. To do this, melt the marshmallows in a water bath. It should become soft and uniform.
  2. In a spoon, add chocolate paste to the mass. The mixture should be thick. It is difficult to say in advance how much exactly Nutella will be needed, you need to focus "on the eye."
  3. Mix everything well.

After an exciting game, you can simply eat a delicious slime.

Finished toys must be stored in plastic containers with tight lids. If the slime has dried out, just hold it in salted liquid to restore elasticity again.

Similar:More from the author: