How to lace up your sneakers beautifully: 13 cool ways to tie shoelaces in an interesting and original way

Lacing in the modern sense is a way of self-expression. Its unusual appearance indicates the desire of the owner of the shoes to stand out from the crowd. If you are young and creative, then this desire should only be encouraged. In this collection, we will clearly demonstrate how to lace up the sneakers beautifully, and what methods of weaving can be thought up for a certain number of holes.

The coolest ways to lace up 4-hole sneakers

Let's first decide on general concepts.

For the number of holes, we will take the number of rings for the laces on only one side.

If we are talking about shoes with four holes, then this shoe has a total of eight holes. We will number the rings from the bottom up.

So, how can you lace up sneakers with four holes? There are few ideas. Unfortunately, such a small number of holes does not allow imagination to turn around to the full. However, you can still come up with something.

Start training with a simple horizontal knit:

• Insert the lugs of the lace into both holes on the front side.
• Pull the right tip through the hole on the right, and the left through the hole on the left, passing one hole.
• Pull the laces horizontally on the opposite side.
• Repeat these steps a few more times until you reach the top hole.

To diversify such a lacing can be one tricky trick. This type of lacing will be called lightning. In drawing, it resembles a lot of crossed transverse lines.

• Pass the lugs of the lace into both holes from the inside. One part of the rope must be left long, the other short.
• The end that is shorter insert into the fourth hole on the other side.
• Insert the long end into the second ring on the reverse side and out through the third hole in the same place. Throw the end in the opposite direction. Insert it into the second ring. Take out through the third.
• Repeat until the long end is at the top. Tie the protruding ropes on the wrong side with a knot.

Zipper is a simple example of how to quickly lace up sneakers or sneakers without a bow.

"Diagonal" is a method of weaving laces, implemented on tightly converging shoes, in which all the ins and outs of weaving will be hidden from view.

• We thread the ropes into the lower rings: one end on the wrong side, the other on the front.
• That part of the lace that was done from the outside is thrown backwards to the opposite rings and displayed through the second hole. Then again we translate it in the opposite direction and drag it through the third ring.
• The part of the lace that was stretched from the inside is drawn along the top into the second ring opposite. Then, diagonally below, we bring up from the other half through the third ring.
• We continue weaving to the limit and tie it as we like from inside the boot.

Finally, we consider a method suitable specifically for shoes with only 4 holes. When lacing shoes with a large number of holes, the cross over under looks much less interesting.

• Initially drag the cord through both rings on the front side.
• Make the cross inside. Pull each tip through the opposite second ring.
• Cross the ropes again, but now outside, and insert both ends of the lace into the third ring opposite.
• Cross the ropes from the inside out. Pull both ends out through the fourth ring. Tie a bow.

The cross-over version is only compatible with tight-fitting shoes. Her idea is that the inside of the weave should not be visible.

Interesting ideas for 5 holes

Some types of weaving, such as diagonal, do not fit into an odd number of rings. But there are many other options that look cool and unusual.

If you are trying to dress 5-hole sneakers, learn how to make a sawtooth knit or zigzag:

• Pass both ends of the rope into the lower rings with a movement away from you.
• Pull one tip through the second ring on its own side. Transfer it to the opposite ring at the same level. Swipe diagonally below and pull to the front through the fourth ring. Throw it to the opposite hole at the same level and pull it out through the fifth hole.
• Release the other end from the wrong side. Remove from the third ring opposite. Insert into the third ring on the other side. Swipe again on the wrong side and pull out through the fifth ring on the other side.
• Tie both ends to a bow.

The result is a spectacular picture from the intersection of parallel and diagonal lines.

The advantage of this lacing is that it is tight enough and holds shoes well.

It is possible to tie laces on sneakers with five holes beautifully with a simple weaving called “knot”:

• Thread both ends of the lace into the bottom holes from the inside.
• Cross both ends together. Wrap them around each other. Pass from the inside into the following holes on the same side. It turns out that each end of the lace will fall into the rings only on its side.
• Fasten the lacing with a bow at the top.

This lacing method is suitable for running shoes with almost any number of holes.

“Staircase” is a beautiful and tough weave. It looks impressive, but you have to tinker with it.

• First you need to thread the laces in the lower rings from the inside.
• Insert the ends each on its side into the second holes.
• Cross the shoelaces on the wrong side, pull out and pass under the first loop on the opposite side. Then insert into the third hole on the same side.
• Repeat again, only now the other end of the lace should be on top.
• Continue to the very end. Tie the laces upside down.

Stiff lacing "ladder" is suitable for both sports and hiking shoes. She has no bows and loose ends. She fixes the shoe well on the foot.

How to lace up 6-hole sneakers nicely

More rings - more opportunities to come up with something original. For 6 holes there is a very difficult version of the "lightning". Choose flat and medium-thick laces, then the pattern of your weaving will be clear.

This lacing got the name “zipper” because of its similarity to the clothes fastener of the same name.

• Bring both ends of the lace through the first holes on the wrong side.
• Draw the ends under the horizontal loop and insert from the inside into the second ring on the opposite side. Get the first cross.
• Then, at each end of the lace, pick up the diagonal eyelet next to your ring from the bottom up.
• Insert the laces into the third holes on the opposite side from the inside.
• Continue until the rings are over.

At the top, the lace-up “zipper” can be completed with a bow.

There is an opinion that this is a male version of weaving. Be that as it may, it is great for sports shoes, sneakers and sneakers.

A super-complex, but no less spectacular interweaving is the “web”. According to its algorithm, it is difficult to tighten the laces tightly, but it looks amazing.

• Insert the ends of the lace from the inside into the second rings.
• Lower the ends from top to bottom in the first holes, making two vertical loops.
• Pass the laces diagonally and out from the wrong side through the third rings on the opposite side.
• Go down and with each string pick up the first vertical loop, making exactly the same loop.
• Again, run the ends diagonally and pull them out from the inside through the fourth holes on opposite sides.
• Continue to the very end.

Above the "web" can not be tied at all. Just hide the ends of the lace inside the boot.

For sneakers with six holes, weaving “lattice” is suitable. It can only be repeated on shoes with an even number of holes.

• In the lower rings laces need to be inserted from the inside.
• Then, pull the ends from the inside right into the fourth holes on opposite sides. Get the first intersection.
• Pull the ends through the fifth holes on its own side.
• Prying off the first intersection by the principle of a lattice, lower each lace into the second hole on the opposite side.
• Make each stitch one stitch up. Take them out through the third rings on their side.
• Make another intersection. And lower the laces into the sixth holes on opposite sides.

This weaving as well as the "web" can not be tied. It holds tight and without a knot.

Original ways for 7 holes

On shoes with a large number of holes, any lacing looks interesting. Nevertheless, we do not forget that some curly weaving cannot be realized with an odd number of rings.

One of the simple but pretty weaves is called the "railway".

• Slip the lanyard tips into the lower rings toward you.
• Insert the ropes into the next holes, making one vertical loop on both sides.
• Cross the ends and pull them through the opposite holes of the same level.
• Repeat one vertical stitch, inserting the same tips into the next highest ring.
• Cross again, only in this case the other part of the rope should be on top.
• Drag the tips through the opposing third rings toward you.
• Do this until the free rings run out.

This lacing option is best left without a bow, just tucking the loose ends of the lace inside.

If you want something special, we suggest you try the ligature in the style of a checkerboard. You will need two contrasting shoelaces and a little patience.

• Hide the short piece of rope inside the boot.
• Pull the long one up through the first ring.
• Throw it into the opposite ring at the same height.
• Insert from the wrong side into the next level ring here.
• Throw it over the top into a ring of the same level from the other edge. Repeat the algorithm to the very top hole.
• Place the short end of the contrasting cord under the edge of your boot next to the already hidden end.
• Pull the rope up under the lower transverse loop, above the second, below the third and further.
• Throw the lace over the upper horizontal loop and in the same way, staggered around the loop, go back down.
• Repeat how long the lace is. Hide the tip behind the edge of the shoe.

The weaving “chessboard” is tough and stable, so it can be held without knots.

For an odd number of holes, there is an option for weaving "for riders." With such a lacing, you can tie tight bows and fix the shoes as tightly as possible on the foot.

Weaving looks pretty simple, but the ties in the middle of some are confusing. A quick glance makes it hard to understand how this can be done.

• Run the lace diagonally inside. Pull the top end out of the seventh hole and the bottom out of the first.
• Lower each tip into the opposite hole at the same level.
• Withdraw through the opposite ring what is higher in level, form a diagonal loop.
• Keep lacing up. The two ends will subsequently meet in the middle, at the height of the fourth rings. Tie the laces with a bow.

Lacing is a great way to stand out from the crowd.

If you like to deviate from the standards, be sure to master some non-trivial ways of weaving laces to add some intrigue to your image.